Electric duct heaters ERH HAVACO
ERH HAVACO is an electric duct heater without built-in automation. The heater's heating power can be regulated by an external HRK regulator. ERH heaters are adapted for installation in rectangular ducts. Heating power range: from 6.0 to 66.0 kW.
Each heater has a two-stage overheating protection:
- - I stage at 50°C - automatic reset.
- - II stage at 100°C - manual reset required.
- Variants & availability
- Description
- Catalogue card
- Downloads
Product name
Diameter [mm]
Heating power [kW]
Power supply [V]
Price
Availability
Product name
Electric duct heaters ERH-10050/150/3F
Diameter [mm]
1000x500
Heating power [kW]
15,0
Power supply [V]
3x400
Price
1.924,00
Availability
Product name
Electric duct heaters ERH-10050/180/3F
Diameter [mm]
1000x500
Heating power [kW]
18,0
Power supply [V]
3x400
Price
2.033,00
Availability
Product name
Electric duct heaters ERH-10050/270/3F
Diameter [mm]
1000x500
Heating power [kW]
27,0
Power supply [V]
3x400
Price
2.816,00
Availability
Product name
Electric duct heaters ERH-4020/120/3F
Diameter [mm]
400x200
Heating power [kW]
12,0
Power supply [V]
3x400
Price
1.501,00
Availability
Product name
Electric duct heaters ERH-4020/150/3F
Diameter [mm]
400x200
Heating power [kW]
15,0
Power supply [V]
3x400
Price
1.729,00
Availability
Product name
Electric duct heaters ERH-4020/60/3F
Diameter [mm]
400x200
Heating power [kW]
6,0
Power supply [V]
3x400
Price
1.456,00
Availability
Product name
Electric duct heaters ERH-5025/60/3F
Diameter [mm]
500x250
Heating power [kW]
6,0
Power supply [V]
3x400
Price
1.240,00
Availability
Product name
Electric duct heaters ERH-5030/210/3F
Diameter [mm]
500x300
Heating power [kW]
21,0
Power supply [V]
3x400
Price
1.968,00
Availability
Product name
Electric duct heaters ERH-5030/90/3F
Diameter [mm]
500x300
Heating power [kW]
9,0
Power supply [V]
3x400
Price
1.403,00
Availability
Product name
Electric duct heaters ERH-6030/90/3F
Diameter [mm]
600x300
Heating power [kW]
600x300
Power supply [V]
600x300
Price
1.229,00
Availability
Product name
Electric duct heaters ERH-6035/120/3F
Diameter [mm]
600x350
Heating power [kW]
12,0
Power supply [V]
3x400
Price
1.566,00
Availability
Product name
Electric duct heaters ERH-6035/180/3F
Diameter [mm]
600x350
Heating power [kW]
18,0
Power supply [V]
3x400
Price
1.772,00
Availability
Product name
Electric duct heaters ERH-6035/210/3F
Diameter [mm]
600x350
Heating power [kW]
21,0
Power supply [V]
3x400
Price
2.022,00
Availability
Product name
Electric duct heaters ERH-6035/300/3F
Diameter [mm]
600x350
Heating power [kW]
30,0
Power supply [V]
3x400
Price
2.577,00
Availability
Product name
Electric duct heaters ERH-6035/90/3F
Diameter [mm]
600x350
Heating power [kW]
90,0
Power supply [V]
3x400
Price
1.283,00
Availability
Product name
Electric duct heaters ERH-7040/90/3F
Diameter [mm]
700x400
Heating power [kW]
9,0
Power supply [V]
3x400
Price
1.522,00
Availability
Product name
Electric duct heaters ERH-8050/210/3F
Diameter [mm]
800x500
Heating power [kW]
21,0
Power supply [V]
3x400
Price
2.251,00
Availability
Please write to us for special price
Do you have questions about this product?
Call us
+48 22 688 07 00Write an e-mail
info@ventia.plContact your sales representative
- Warsaw
- Warsaw
- Warsaw
- Warsaw
- Warsaw
- Warsaw
- Warsaw
- Warsaw
- Warsaw
- Warsaw
- Warsaw
- Warsaw
- Warsaw
Electric duct heaters ERH
Electric heaters are designed to heat clean air. The housing is made of aluzinc, which is resistant to elevated temperatures. Heating elements are made of stainless steel. In order to regulate the heating power, HRK 1 or HRK 3 controllers should be used.
Use
Duct heaters are used to heat clean air in domestic ventilation systems, especially in autumn and winter, as well as in industrial installations requiring constant supply air temperature. ERH heaters also perform well as pre- or post-heaters, supplementing installations based on heat recovery air handling units.
Construction
The heater housing is made of steel sheet covered with high-quality Aluzinc coating, which guarantees high corrosion resistance.
The heating elements are made of AISI 304 stainless steel. The junction box has an IP44 degree of protection.
- Catalogues
About brand
The HAVACO brand was established in 2013 as a result of the constantly growing needs of the HVAC market for modern, reliable and at the same time affordable ventilation devices and accessories. All brand products have been designed to meet customer expectations in terms of both price and effectiveness, and the components used ensure high reliability.
The exclusive distributor of the HAVACO brand in Europe is Ventia. This guarantees the highest quality of service, full commercial support, technical and logistic support, and authorized service throughout the country.
One of the brand's basic priorities is availability - that is why most of the assortment is always available immediately from the distributor's warehouses in Raszyn near Warsaw.
Our competitive advantages- click on the selected slogan to learn more
The distributor of the HAVACO brand - Ventia is a technical company that effectively combines cooperation with industry designers and installation companies.
The company's mission is to support all professionals operating in the HVAC industry and to distribute proven ventilation and air conditioning solutions on the European market. We serve our clients both at the company's headquarters and through local technical and commercial offices.
The commercial structure of Ventia covers the whole of Eorope. Our employees are professional technical staff with many years of experience in the HVAC industry.
The Technical Department and Product Managers are a source of knowledge and technical support for our clients - designers, installation companies and investors - in the field of own brands distributed by Ventia and other products from the company's offer. Employees of the Sales Department - Technical and Commercial Specialists - at the company's headquarters, guarantee efficient and quick execution of orders and preparation of offers.
The HAVACO brand is distinguished by a wide customer portfolio, thanks to which each customer can obtain all the elements necessary to perform a professional ventilation installation from one supplier.
The offer includes, among others, fans, heaters, a system of round fittings, round ducts, a distribution system, assembly and production materials, and air curtains.
High-bay warehouse with an area of approx 3600 m² and a capacity of over 3,000 pallets, gives us a great advantage over the competition.
We know the market and the expectations of our customers, which is why we attach great importance to the availability of products directly from our warehouse.
We have proven and selected suppliers with whom we have been cooperating for years and on a large scale.
The majority of our assortment is direct import from foreign producers. We are also a leading trading partner for leaders of the Polish HVAC industry. This gives us the opportunity to offer competitive prices for our products, while maintaining the appropriate level of quality of the goods.
Customer service
Technical Support
Wide range of products
Availability from stock
